Beyond the steel: what makes a Japanese knife perform in a professional kitchen?

TSC Australia

From blade geometry and sharpening to the demands of a busy service, Japanese knife specialist Chef’s Armoury explains why craftsmanship matters more than specifications alone

Two Japanese knives can be made from the same steel, carry similar specifications and still perform very differently in a professional kitchen.

The difference becomes apparent in how a blade moves through food, how well it holds an edge and how it performs when resharpened.

“Steel is just a raw ingredient,” says Chef’s Armoury, the Japanese knife specialist founded by Leigh and Stephanie Hudson in 2007.

It’s a comparison with cooking. Just as quality ingredients don’t guarantee a good dish, premium steel alone doesn’t guarantee a well-made knife.

Many Japanese knives undergo more than 60 manufacturing steps, according to the retailer. Maintaining consistent quality throughout the entire knifemaking process is what separates a well-made blade from one that simply looks the part.

Why a 240mm slicer can be the right choice for service

For chefs preparing fish and meat, the geometry and length of a sujihiki can be just as important as the steel itself.

Chef’s Armoury generally recommends blades between 240mm and 270mm for protein preparation, where a longer, thinner profile allows for cleaner slicing with less impact on the ingredient.

But there is a trade-off between precision and the demands of service.

A longer, finer blade may suit controlled preparation, while a slightly more substantial 240mm sujihiki can be better suited to the pace of a busy working kitchen.

The Mcusta Zanmai Hammer 240mm Sujihiki is one example of that balance.

According to Chef’s Armoury, the Hammer range has a thinner bevel than a typical European knife but a more substantial profile than many finer Japanese blades, offering a compromise between cutting performance and durability.

Craftsmanship beyond the specifications

Produced by Marusho Industry in Seki, Japan, the Mcusta Zanmai Hammer range combines precision manufacturing with attention to blade geometry and finishing.

The 240mm sujihiki features a VG10 steel core, 33-layer Damascus construction and a distinctive hammered finish.

Chef’s Armoury selected MCUSTA as one of its early knife ranges, citing the manufacturer’s approach to quality control and consistency.

The retailer points to the company’s investment in manufacturing technology, with improvements to equipment and production processes observed during visits to its Japanese factory.

The Hammer series also has a distinctive appearance, with a polished hammered blade and twisted red-brown pakkawood handle.

It’s a consideration for chefs working in open kitchens, although Chef’s Armoury maintains that performance should always come before appearance.

Carbon steel isn’t always the better choice

Carbon steel continues to attract interest among professional chefs, particularly those who sharpen their own knives.

But Chef’s Armoury believes the assumption that carbon steel necessarily offers better edge retention than stainless steel is outdated.

In the retailer’s experience, some modern Japanese stainless steels can match or outperform carbon alternatives, depending on the skill of the knifemaker, heat treatment and geometry.

Carbon steel, however, offers a different sharpening experience.

“The silky feel of carbon on stone is something you can’t get with stainless,” the team explains.

That appeal comes with additional maintenance requirements, particularly around corrosion and blade care.

“If you aren’t going to be fastidious, don’t even look at a carbon blade.”

Ultimately, the choice comes down to how a chef works, the demands of their kitchen and how much attention they’re prepared to give their knives.

Chefs are moving towards specialist knives

When Chef’s Armoury opened in 2007, German knives were a familiar choice in many Australian professional kitchens.

The retailer’s early conversations with chefs centred on the advantages of Japanese blades: thinner profiles, sharper edges, better edge retention and cleaner presentation.

Almost two decades later, those characteristics are much more familiar to its customers.

The conversation has shifted towards specialist knives designed for particular applications.

Chef’s Armoury reports growing interest in deba knives for fish preparation, honesuki for boning and usuba for vegetables.

There have also been some less conventional applications.

The retailer says it has sold soba kiri knives, traditionally used for cutting Japanese noodles, to pasta chefs looking for a specialist cutting tool.

It’s a reflection of how some professional chefs are approaching their knife collections, choosing blades for specific tasks rather than relying entirely on multipurpose knives.

For Chef’s Armoury, the principle remains the same regardless of the knife.

The right choice isn’t necessarily the most expensive steel or the most elaborate finish. It’s a blade whose craftsmanship, cutting performance and maintenance requirements suit the work being done.

This feature was produced in partnership with Chef’s Armoury.

Explore the Mcusta Zanmai Hammer 240mm Sujihiki at Chef’s Armoury.

Built by Chefs. Powered by You.

For 18 years, The Staff Canteen has been the meeting place for chefs and hospitality professionals—your stories, your skills, your space.

Every recipe, every video, every news update exists because this community makes it possible.

We’ll never hide content behind a paywall, but we need your help to keep it free.

If The Staff Canteen has inspired you, informed you, or simply made you smile, chip in £3—less than a coffee—to keep this space thriving.

Together, we keep the industry connected. Together, we move forward.

TSC Australia

TSC Australia

Editor 18th November 2026

Beyond the steel: what makes a Japanese knife perform in a professional kitchen?